RedCore R-4 Manuale Utente Scaricare il pdf (Pagina 3)

Preparing The Case:

The case that is provided with your kit is a custom case that will need to be drilled. Drilling

a case is easy if you use the proper procedure. First download a copy of the file

SLTTEMPLATE.bmp from the qrpkits website. It is located in the same place that you found

this manual. Save the file on your computer and open it with Microsoft Paint, which you can find

in your accessories section of your computer. Print out a copy of the template on your printer.

Cut out the template and tape it to the top of the case. The top of the case is the one with the bent

up channels with screw holes in them. The bottom is the U shaped piece.

Top of Case

Bottom of Case

Then bend each end over the ends and secure with tape. I use masking tape, but you may use

regular scotch tape if you wish. Make sure that the template is centered on the top of the case.

Once you are satisfied, then go ahead and secure it with tape. Now, take a center punch and mark

the case every place that there is a + in the layout template, making sure to put the point as close

as possible to where the lines cross. Now use a drill press to drill out the holes to the size on the

template. When drilling in metal, I like to start with a smaller drill and gradually work my way

1 2 3 4 5 6 7 8 ... 15 16

Nessun commento

RedCore R-4 Manuale Utente Pagina 3